Skip to Content
Filters

AVONIC
AV-CM93-IP-B

Avonic AV-CM93-IP-B is a 4K60 PTZ camera with 30x optical zoom, built for conference rooms, lecture halls, houses of worship and live production. A Sony 1/1.8" sensor and F1.6 aperture deliver sharp, low-noise video down to 0.05 lux, while HDMI 2.0 and Gigabit IP outputs with ONVIF support make it easy to integrate with existing AV and streaming setups. Finished in black.

AVONIC
AV-CM93-IP-W

AV-CM93-IP-W PTZ CAMERA 4K60 30X ZOOM, Resolution Up to 4K60, HDMI output HDMI 2.0 up to 4K60,Sensor Sony 1/1.8,RJ45 1 Gb,.05LUX @, F1.6, Input Voltage 12V,Power consumption 18W , Power supply 12V2A,Power connector EIAJ-4 - Phil more 255 plug, 30fps max, , ONVIF.
White Color.

AVONIC
AV-LC90-1

Avonic AV-LC90-1 is a single-camera AI tracking license for CM90 series 4K60 PTZ cameras. Once activated, the camera follows presenters automatically using multiple tracking modes, with no manual adjustment or camera operator needed. Ideal for lectures, recordings and live events, it delivers professional-grade production with a smaller crew.

BOSCH
CCSD-DL2

A CCS 1000 D discussion device with long microphone (480 mm flexible stem). Participants speak, request to speak and listen through the built-in loudspeaker or headphones; a white light shows when they can speak. Plug and play, and quickly set as a chairperson device (chairperson buttons ordered separately). Scroll down for details.

BOSCH
CCSD-DS2

A CCS 1000 D discussion device with short microphone (310 mm flexible stem). Participants speak, request to speak and listen through the built-in loudspeaker or headphones; a white light shows when they can speak. Plug and play, and quickly set as a chairperson device (chairperson buttons ordered separately). Scroll down for details.

BOSCH
CCSD-EXU

The extension unit for the CCS 1000 D Digital Discussion System: powers up to 85 more discussion devices, for a system of up to 245. A built-in splitter lets you install it anywhere in the chain, with short-circuit protection, and it switches on and off with the control unit. Tabletop or 19-inch rack. Scroll down for details.

BOSCH
CCSD-FCML

The flush-mounted chairperson device for CCS 1000 D, with a 480 mm flexible microphone, built-in loudspeaker and a priority button that overrules all participant microphones, announced by a chime. Fits tables up to 40 mm thick. Scroll down for details.

BOSCH
CCSD-FDL

A flush-mounted CCS 1000 D discussion device for participants, with a 480 mm flexible microphone and built-in loudspeaker: the solution for rooms where table space is key. A white light shows when you can speak, green shows a waiting request. Fits tables up to 40 mm thick. Scroll down for details.

BOSCH
DCNM-APS2

The heart of every DICENTIS system: it routes, controls and processes all audio and powers the discussion devices. Built-in adaptive feedback suppression and two 5-band equalizers keep speech clear, and XLR and RCA audio inputs and outputs connect a PA system or video conferencing. Scroll down for details.

BOSCH
DCNM-CB02

A 2 m prefabricated DICENTIS system cable with RJ45-type connectors and extra power pins. One cable carries network and power (up to 140 W), linking DICENTIS devices to each other and to the powering switch, for loop-through and redundant cabling. Also listed as DCNM-CB02-I. Scroll down for details.

BOSCH
DCNM-CB05

A 5 m prefabricated DICENTIS system cable with RJ45-type connectors and extra power pins. One cable carries network and power (up to 140 W), linking DICENTIS devices to each other and to the powering switch, for loop-through and redundant cabling. Also listed as DCNM-CB05-I. Scroll down for details.

BOSCH
DCNM-CB10

A 10 m prefabricated DICENTIS system cable with RJ45-type connectors and extra power pins. One cable carries network and power (up to 140 W), linking DICENTIS devices to each other and to the powering switch, for loop-through and redundant cabling. Also listed as DCNM-CB10-I. Scroll down for details.

BOSCH
DCNM-CB25

A 25 m prefabricated DICENTIS system cable with RJ45-type connectors and extra power pins. One cable carries network and power (up to 140 W), linking DICENTIS devices to each other and to the powering switch, for loop-through and redundant cabling. Also listed as DCNM-CB25-I. Scroll down for details.

BOSCH
DCNM-FBD2

The heart of a DICENTIS Flush seat for participants and chairpersons: the base device fits under the table or seat, or in an armrest, and the flush panels connect to it. It serves 2 participants, or up to 4 in dual use sharing microphone and loudspeaker, and loops through to the next base device on the DICENTIS system cable. Scroll down for details.

BOSCH
DCNM-FEC

End caps that finish both ends of a row of DICENTIS Flush panels and cover cut-out imperfections, for a clean look in wood or other surfaces. They fit on the flush couplings. Set of 50, RAL 9017 Traffic black. Scroll down for details.

BOSCH
DCNM-FHHC

A handheld microphone for DICENTIS Flush seats without space on the table, or for a floor-stand position. Uni-directional condenser with built-in plop and windshield, a request-to-speak button, red and green status lights and a 1.5 m coiled cable. Connects through the DCNM-FAI flush audio interface. Scroll down for details.

BOSCH
DCNM-FLSP

The loudspeaker panel for a DICENTIS Flush seat, with the same speaker as the DICENTIS tabletop devices. It can stay on while the microphone is open, for clear speech at every seat. It connects to the DCNM-FBD2 with its own 2 m cable. Scroll down for details.

BOSCH
DCNM-FMCP

Connects a DCNM-MICSLS or DCNM-MICSLL screw-lock microphone to the DCNM-FBD2 flush base device. A shock mount keeps table noise out of the microphone, and the built-in pre-amplifier keeps mobile phone immunity and controls the microphone lights. The microphone and loudspeaker can be on at the same time. Scroll down for details.

BOSCH
DCNM-FMICB

The microphone button for a DICENTIS Flush seat. Its LED bar shows red when the microphone is on, green on the waiting list and white when it is possible to speak. It connects to the DCNM-FBD2 over RJ12 and powers the DCNM-FMCP microphone panel next to it. Scroll down for details.

BOSCH
DCNM-FPRIOB

The priority button for a DICENTIS Flush seat with priority, such as the chairperson. Its LED bar shows white when it is possible to speak and red when priority is on. Two RJ12 connectors link it to the DCNM-FBD2 and loop through to the next panel, and it powers the DCNM-FMCP. Scroll down for details.

Showing 200 of 315 results
Load more
Chat on WhatsApp