DICENTIS Conference System
Revolutionary IP-based platform for the integrated conference world of tomorrow
DICENTIS Conference System
Revolutionary IP-based platform for the integrated conference world of tomorrow
Bosch DICENTIS DCNM-CB10 System Cable Assembly 10 m
The DICENTIS DCNM-CB10 is a 10-metre prefabricated system cable that carries both network communication and power in a single cable. It connects DICENTIS devices to the audio powering switch or powering switch, and is the right length for longer runs, such as from the equipment rack to the first seat.
Both ends are factory-terminated with RJ45-type connectors that include additional power pins, which saves installation time on site. The cable carries up to 140 W, with a 6.40 mm TPV jacket in Signal black (RAL 9004) and a bend radius over 26 mm.
Prefabricated DICENTIS System Cable
A 10 m prefabricated system cable for connecting DICENTIS conference devices across longer distances.
Network & Power in One Cable
Carries both network communication and power, so each DICENTIS device needs only one connection.RJ45-Type Connectors with Power Pins
Factory-terminated at both ends with RJ45-type connectors that include additional pins for power.
Rack-to-Seat Length
The 10 m length reaches from the equipment rack to the first or last seat.
Loop-Through & Redundant Cabling
Designed for daisy-chaining devices and building redundant cable connections for maximum system reliability.
Flexible TPV Jacket
6.40 mm TPV jacket with a bend radius over 26 mm, in Signal black (RAL 9004).
DICENTIS loop-through and redundant system cabling
Loop-Through & Redundant System Cabling
Connect to the Powering Switch
Run a system cable from the audio powering switch to the first DICENTIS device. One cable carries both network data and power.
Loop Through Each Device
Link each device to the next with a system cable to build a daisy chain. Discussion, voting and touchscreen devices can all share the same chain.
Add a Redundant Return Cable
Connect the last device back to the powering switch (shown dashed). This closes the loop, so every device can be reached from both directions.
Choose the Right Length
Use 2 m or 5 m cables between neighbouring seats, and 10 m or 25 m cables for longer runs from the equipment rack to the first or last device.
If a cable in a redundant loop is damaged or disconnected, the devices stay connected and powered through the other side of the loop, so the meeting carries on without interruption.
DICENTIS loop-through and redundant system cabling
Loop-Through & Redundant System Cabling
Connect to the Powering Switch
Run a system cable from the audio powering switch to the first DICENTIS device. One cable carries both network data and power.
Loop Through Each Device
Link each device to the next with a system cable to build a daisy chain. Discussion, voting and touchscreen devices can all share the same chain.
Add a Redundant Return Cable
Connect the last device back to the powering switch (shown dashed). This closes the loop, so every device can be reached from both directions.
Choose the Right Length
Use 2 m or 5 m cables between neighbouring seats, and 10 m or 25 m cables for longer runs from the equipment rack to the first or last device.
If a cable in a redundant loop is damaged or disconnected, the devices stay connected and powered through the other side of the loop, so the meeting carries on without interruption.
Key specs
- Length 10 m (33.0 ft)
- Prefabricated, RJ45-type with power pins
- Network and power up to 140 W
- Loop-through and redundant cabling
- Diameter 6.40 mm, TPV jacket
- Bend radius over 26 mm
- Signal black (RAL 9004)
- Bosch order no. F.01U.416.427
Specifications
General
| Specification | Value |
|---|---|
| Model | DCNM-CB10-I |
| Order number | F.01U.332.020 |
| Product type | System cable assembly |
| System | DICENTIS Conference System |
| Length | 10 m (33.0 ft) |
| Function | Network communication + power in one cable |
Connectors
| Specification | Value |
|---|---|
| Termination | Both ends, RJ45-type connectors with additional power pins |
| Use | DICENTIS device to audio powering switch / powering switch, loop-through and redundant connections |
Cable
| Specification | Value |
|---|---|
| Diameter | 6.40 mm |
| Jacket material | TPE/85A (LSZH-FT2), low smoke zero halogen |
| Conductor insulation | FR-PE |
| Conductor type | Solid core |
| Bend radius | 35 mm |
| Color | RAL 9017 Traffic Black |
Regulatory
| Region | Marks |
|---|---|
| Europe | CE; RoHS 2011/65/EU + 2017/2102, EN IEC 63000:2018 |
| Global | EN ISO 22259:2021 |
| Great Britain | UKCA |
Parts Included
| Quantity | Component |
|---|---|
| 1 | DCNM-CB10-I DICENTIS system cable assembly, 10 m |