A CCS 1000 D discussion device with short microphone (310 mm flexible stem). Participants speak, request to speak and listen through the built-in loudspeaker or headphones; a white light shows when they can speak. Plug and play, and quickly set as a chairperson device (chairperson buttons ordered separately). Scroll down for details.

The extension unit for the CCS 1000 D Digital Discussion System: powers up to 85 more discussion devices, for a system of up to 245. A built-in splitter lets you install it anywhere in the chain, with short-circuit protection, and it switches on and off with the control unit. Tabletop or 19-inch rack. Scroll down for details.

The flush-mounted chairperson device for CCS 1000 D, with a 480 mm flexible microphone, built-in loudspeaker and a priority button that overrules all participant microphones, announced by a chime. Fits tables up to 40 mm thick. Scroll down for details.

A flush-mounted CCS 1000 D discussion device for participants, with a 480 mm flexible microphone and built-in loudspeaker: the solution for rooms where table space is key. A white light shows when you can speak, green shows a waiting request. Fits tables up to 40 mm thick. Scroll down for details.

The heart of every DICENTIS system: it routes, controls and processes all audio and powers the discussion devices. Built-in adaptive feedback suppression and two 5-band equalizers keep speech clear, and XLR and RCA audio inputs and outputs connect a PA system or video conferencing. Scroll down for details.

A 2 m prefabricated DICENTIS system cable with RJ45-type connectors and extra power pins. One cable carries network and power (up to 140 W), linking DICENTIS devices to each other and to the powering switch, for loop-through and redundant cabling. Also listed as DCNM-CB02-I. Scroll down for details.

A 5 m prefabricated DICENTIS system cable with RJ45-type connectors and extra power pins. One cable carries network and power (up to 140 W), linking DICENTIS devices to each other and to the powering switch, for loop-through and redundant cabling. Also listed as DCNM-CB05-I. Scroll down for details.

A 10 m prefabricated DICENTIS system cable with RJ45-type connectors and extra power pins. One cable carries network and power (up to 140 W), linking DICENTIS devices to each other and to the powering switch, for loop-through and redundant cabling. Also listed as DCNM-CB10-I. Scroll down for details.

A 25 m prefabricated DICENTIS system cable with RJ45-type connectors and extra power pins. One cable carries network and power (up to 140 W), linking DICENTIS devices to each other and to the powering switch, for loop-through and redundant cabling. Also listed as DCNM-CB25-I. Scroll down for details.

The heart of a DICENTIS Flush seat for participants and chairpersons: the base device fits under the table or seat, or in an armrest, and the flush panels connect to it. It serves 2 participants, or up to 4 in dual use sharing microphone and loudspeaker, and loops through to the next base device on the DICENTIS system cable. Scroll down for details.

End caps that finish both ends of a row of DICENTIS Flush panels and cover cut-out imperfections, for a clean look in wood or other surfaces. They fit on the flush couplings. Set of 50, RAL 9017 Traffic black. Scroll down for details.

A handheld microphone for DICENTIS Flush seats without space on the table, or for a floor-stand position. Uni-directional condenser with built-in plop and windshield, a request-to-speak button, red and green status lights and a 1.5 m coiled cable. Connects through the DCNM-FAI flush audio interface. Scroll down for details.

The loudspeaker panel for a DICENTIS Flush seat, with the same speaker as the DICENTIS tabletop devices. It can stay on while the microphone is open, for clear speech at every seat. It connects to the DCNM-FBD2 with its own 2 m cable. Scroll down for details.

Connects a DCNM-MICSLS or DCNM-MICSLL screw-lock microphone to the DCNM-FBD2 flush base device. A shock mount keeps table noise out of the microphone, and the built-in pre-amplifier keeps mobile phone immunity and controls the microphone lights. The microphone and loudspeaker can be on at the same time. Scroll down for details.

The microphone button for a DICENTIS Flush seat. Its LED bar shows red when the microphone is on, green on the waiting list and white when it is possible to speak. It connects to the DCNM-FBD2 over RJ12 and powers the DCNM-FMCP microphone panel next to it. Scroll down for details.

The priority button for a DICENTIS Flush seat with priority, such as the chairperson. Its LED bar shows white when it is possible to speak and red when priority is on. Two RJ12 connectors link it to the DCNM-FBD2 and loop through to the next panel, and it powers the DCNM-FMCP. Scroll down for details.

Positioning tools (2 sets) that place the flush couplings accurately when installing DICENTIS Flush panels, with a template for the loudspeaker cut-out. An installer's tool, not a part of the working system. Scroll down for details.

Lets each participant choose the interpretation language and set the headphone volume. Plug in headphones and the 1.44-inch display turns on, with up to 100 languages in native characters. A participant's preferred language is selected automatically. Connects to the DCNM-FBD2. Scroll down for details.

Parliamentary-style voting for a DICENTIS Flush seat: five colour-coded touch buttons for Present, For, Against, Abstain and DNPV. They light up only when voting is open, so they never distract. Powered and controlled by the DCNM-FBD2 over one RJ12 cable. Scroll down for details.

A single-user interpreter desk for the DICENTIS Conference System: a 7-inch high-contrast display, 7 relay presets and A/B/C output buttons, for up to 100 languages and up to ten desks per booth. Complies with ISO 20109:2016, with tactile and audible feedback for visually impaired interpreters. Microphone ordered separately. Scroll down for details.